Here we can introduce you some characteristics of more magnesium alloys:
Sand and permanent mold castings
AM100A-T61: Pressure tight, good combination of strength and elongation
AZ-63A: Good room-temperature strength, ductility and toughness
AZ91C and E-T6: General-purpose alloy, moderate strength
AZ92A-T6: Pressure tight, good strength
EQ21A-T6: Pressure tight, excellent short-time elevated-temperature mechanical properties
HK31A-T6: Good castability, pressure tight, creep resistant to 350o C (660 o F)
HZ32A-T5: Good castability, pressure tight, equal or better creep resistance than HK31A-T6 to 260o C (500o F)
QE22A-T6: Good castability, pressure tight, high yield strength to 200o C (400o F)
QH21A-T6: Good castability, pressure tight, creep resistance and high yield strength to 250o C (480o F)
WE43A-T6: High strength at room and elevated temperatures (to 290o C, or 550o F), good corrosion resistance
WE54A-T6: Similar to WE43A-T6, but slowly loses ductility upon exposure to 150o C (300o F)
ZC63A-T6: Pressure tight, stronger and more castable than AZ91C
ZE41A-T5: Pressure tight, medium-strength elevated-temperature alloy, improved castability over ZK51A
ZE63A-T6: Especially useful for strong, thin-wall pore-free castings
ZH62A-T5: High room-temperature yield strength
ZK51A-T5: Good room-temperature strength and ductility
ZK61A-T5: Similar to ZK51A-T5, but with higher yield strength
ZK61A-T6: Similar to ZK61A-T5, but with higher yield strength
Die-castings
AE42-F: Good strength, good creep resistance to 150o C (300o F)
AM20-F: High ductility and impact strength
AM50A-F: Excellent ductility and energy-absorbing properties
AM60A and B-F: Similar to AM50A-F, but slightly higher strength
AS21-F: Similar to AE42-F
AS41A-F: Similar to AS21-F, but with decreased ductility and creep resistance, and increased strength and castability.
Forgings
AZ31B-F: Good forgeability, medium strength, can be hammer forged, seldom used
AZ61A-F: Stronger than AZ31B-F
AZ80A-T5: Stronger than AZ61A-F
AZ80A-T6: Better creep resistance than AZ80A-T5
M1A-F: Good corrosion resistance, low to medium strength, can be hammer forged, seldom used
ZK31-T5: High strength, medium weldability
ZK60A-T5: Strength similar to AZ80A-T5, but higher ductility
ZK61-T5: Similar to AZ60A-T5
ZM21-F: Good forgeability, medium strength, good damping capacity
Extruded bars and shapes
AZ10A-F: Low cost, moderate strength
AZ31B and C-F: Medium strength
AZ61A-F: Moderate cost, good strength
AZ80A-T5: Stronger than AZ61A-F
M1A-F: Low to medium strength, good corrosion resistance and damping capacity
ZC71-T6: Medium cost, good strength and ductility
ZK21A-F: Moderate strength, good weldability
ZK31-T5: High strength, medium weldability
ZK40A-T5: High strength, more extrudable than ZK60A, not weldable
ZM21-F: Good formability and damping capacity, medium strength
Sheet and plate
AZ31B-H24: Medium strength
ZM21-0: Good formability and damping capacity
ZM21-H24: Medium strength
Source Magnesium . com
|